Wrangling jewelry supplies

Many of us who make jewelry tend to accumulate a stash of beads and stones. Lots of it. The eventual challenge is some way of keeping many MANY little items organized so that they are useable and accessible. Additionally, there are tools and other materials (metal, chemicals, consumables).

For those of us that do shows, that may also include parts that need to travel. Another consideration is space (or lack thereof) and how that space looks.

I have my beads and stones split into everyday/travel usage, and archival/stash. I mostly work from home, but my main tools, stones, and beads pack up to come with me when I’m at the renfair in the spring.

20130609-153545.jpg
This is my view sitting at my desk, and things I use the most nearby.

20130609-150512.jpg
On the right is my tower of beads and cabs that I use a lot and are the ones that pack up and come with me when I go to the renfair. They are stored in these in/out trays which enables me to easily access whichever box I need. Inside the boxes are lots of 2×2″ ziplocs. I can store more densely, it keeps beads from rubbing/scratching as much, and will keep things from scattering if I dump a box.

Beads in here are ones I use a lot. For me that’s mostly smaller beads (under 6mm). Chunkier and larger beads, and ones I just have quite a bit of, the backup stays in the archival stash storage.

I deliberated for a long time on some sort of workable system to somehow carry “just a pinch” instead of entire amount of some beads. The concern was forgetting about the backups and re-buying unnecessarily, or being stingy with a particular bead because I thought I might be nearly out and couldn’t replace.

What I came up with works fabulously for me. Just simply put a tiny snippet of paper in the little bag that says “more” and that tells me that it isn’t the last of them. There’s more in the backup stash. And no tag means that’s all of them, period. Works great.

Immediately to the right of the tower (out of picture) is a folder slipped between the tower and the wall of the cubby where I throw tax receipts until I log them.

20130609-150817.jpg
To the left is my wire. It’s in the ziplocs in the vertical file sorter. I pulled out one bag so you can see how it’s divided. I used a plastic one from the office supply for many years, then some years back, I commissioned this pretty one from wood.

The type of wirework I do, I’m fine with everything in coils as opposed to spools, plus it stores/packs very flat. I use several shapes and a lot of gauges and have things divided that way, metals are mixed since they’re easy to tell apart.

20130609-153717.jpg
When it’s time to go to the renfair, my critical stuff packs down to this. I leave displays packed in the booth during the season, but this little cart comes in and out with me each day.

The milk crate goes together like a puzzle. Literally. I’m the only one that can really pack it because for it all to fit, it has to go in a certain order. But that’s not a bad thing since it’s obvious if I’m forgetting something. It contains my beads, wire, and tools. Heavy!

The rest of the cart holds a few trays with understock, flowery bag (stock), change box and my wooden mug. Add a couple bags of ice on the way in, we’re set! That little wagon is the workhorse of this operation and has seen some hard use. Still going strong. I’m thinking this next year I may repaint it (getting weathered) and tighten everything up again. It’s safe to say I may get creative with the paint job.

20130609-145240.jpg

To the right of where I sit is the archival/stash bead and cab storage. I need to be able to store densely, but still have reasonable easy access. I also prefer more attractive storage when that’s an option. I found this flat-file wooden drawer set at an office supply store (Office Depot/Max, couple years ago, $40ish). I’m guessing for storing different types of paper perhaps.

I will say, for the amount of weight in it, I’m glad it’s wood. I don’t think plastic drawers would hold up as well.

20130609-145422.jpg

Inside, I have ziplocs of beads (above pic). I keep the type of stone together in whatever the larger ziploc it needs, then inside that, stone shapes in their own bags. The only exception are donuts and hearts. They are grouped together because of how I use them. It’s easy to see at a glance where a bag is, and pull just that out for more thorough digging. Each drawer is roughly organized in broad categories…shells/pearls, man-made, opaque/soft (lapis, turquoise, malachite, etc), gemstones (amethyst, citrine, garnet, etc). You get the idea. The baggies in shallow drawers work well because I can jostle stuff flat to fit and see everything very quickly.

The two deeper drawers…one holds miscellaneous larger chunky projects and personal stash. The other deep one holds pendant cabs. I have a box of handcut designer cabs in the bead tower that travels, and this is the other random stuff I’ve acquired over the years or things that are weird shapes or fragile and don’t travel.

The pendant can drawer is divided similar to the beads, snack-sized ziplocs according to type, use, or material. Depends. These are more upright since the drawer is deeper, and I’ve used a marker to write on the upper right-hand corner of anything not obvious from a glance so I don’t have to pull it out and handle everything looking for a bag. Some I have enough for their own bag, like malachite, lapis, onyx, etc. Some are grouped, like “darks” has obsidian and such. There’s “shells and pearls”, then there’s “stripey” (hey, it’s my system) ๐Ÿ™‚

20130609-145516.jpg

To the upper left is a cabinet where I keep another set of drawers. This door is normally closed. Found these at either Wal-Mart or Target.

I keep light-weight small things I don’t need into very often. One drawer is non-clear crystals and rough gemstones (ie. tourmaline, citrine, amethyst, etc). One is druzy and clusters. Another is faceted stuff. Then pearls. A couple are bags of backup ring cabs. One is “weird stuff” ๐Ÿ™‚ Basically small light stuff. Clear quartz crystals, I keep them elsewhere (more later).

I also keep various ziploc shapes in here. I may have a small ziploc addiction. Ahem.

20130609-150947.jpg

Here’s what the door looks like closed. Incidentally, to the left, see the wall? Normally an open door covers that. Behind that door, up on the wall are my drafting tools and cutting mats. Leaning on the floor is my kiln fire-board and stained glass wood board, and some matte boards and large watercolor sheets. Leaning in the corner behind the door are stained glass zinc and copper came for frames, along with several walking sticks for rainy faire days. My lead stained glass came hangs over a bicycle hook on the wall on the other side of the door next to the armoire (more later).

20130609-150909.jpg
My work desk is a large oak corner computer desk with hutch. That means it has all sorts of great cubby holes and under-shelves.

Under where my legs go, there’s these shelves (books?!?) where I put stuff I only need access to once in a great while. It’s just the right size for stacks of plastic shoe-boxes. Shoeboxes for acrylic paints, ribbons, stamps. One box is full of glass bead soup I add to regularly and use for this one pendant I do. Another is full of colored copper wire. And one is where I keep my clear quartz crystals. Interior bags divide them up by size, quality, etc.

20130609-181750.jpg

This is the underneath to the right of where I sit. See that one little shelf tucked up under there with a small trashcan and things leaning beside it? That’s my shipping station. I can reach right under and pull out flat boxes or padded envelopes. The little trashcan contains tissue paper, marker, ziplocs, business cards, and packing tape. Everything I need to mail an order. I also keep my heavy hole-punch and repoussรฉ bowl under there.

Just to the right of that, see that tall cubby? I think it was probably meant to hold a PC tower. I use it for my large flat storage (big paper cutter, photography light tent, my music folder, extra work mats).

And just above those, the things that look like drawers? Those are actually flip-down doors. The right hand one I’m guessing was meant for one of those on/off boxes for equipment. But it’s small and long and opens through to the back. I use it to hold one more box (metal beads and findings) that doesn’t fit in the bead tower, and also my long tool steel for making chasing tools.

The left of those doors flips down and reveals a mouse tray. I use it with a tray on it to hold my mandrels and hammer.

20130609-151044.jpg

Behind me on the wall is an armoire that holds my other stuff. It’s packed pretty densely too. The big open hole in the middle is where my little kiln goes (out on the kitchen table at the moment). The rest of the cabinet has containers for various interests (stained glass, lampworking, bobbin lace, beading, bookbinding, calligraphy, watercolors, iconography, glass fusing, needlework, knit/crochet, metal fabrication, leatherworking, pyrography).

There’s a few large drawers below those open shelves. One is jewelry related stuff, one is display making materials, and one is for UFOs (unfinished objects, projects in progress).

I do things modularly (take out/put away, but most things are doable at my desk or kitchen table). The larger and messier stuff (dyeing, woodworking, pottery) are out in the garage. Fiber arts, ahem, are spread throughout ๐Ÿ™‚ Not pictured are a large floor loom, couple spinning wheels, tools, fiber, fleeces.

I do enough different things, I’m conscious of storing them compactly. This modular system I went to a few years ago has been working really well. My focus is on wire jewelry since that’s my business, and secondarily on fiber since that’s another big love. The other stuff I do intermittently for fun, plus I’m finding all the crossover skills useful.

Anyway, this is part of my studio, mostly the jewelry, since that was a recent discussion with friends. Sometime later I’ll do a tour of the rest of it. Hopefully, if you’re looking for an idea or two on how to organize your jewelry-making endeavors, this was helpful.

Boxes and Walls

Squee! I figured out the missing part of a new display idea I want to build for next season!!

Okay, so you ever have these half-formed ideas that feel like the beginnings of a GREAT idea, but needs *something*??

I do that A LOT and back-burner mull things until something occurs (I work through a lot of jewelry designs this way), and sometimes I run across an independent idea that’s the missing puzzle piece…

So the problem has been that I need a better way to display larger neckpieces and more fragile/expensive pieces at the renfair.

The challenges are:
–wind (flat neck boards go sailing, along with jewelry, which can get bent or broken…a few okay, but don’t want tons)
–not lots of tall along back of counter (it’s already high, we stand behind, and lots of that would be in the way. A few okay, but not solid line or we can’t reach things in front)
–easy to pack up at end of day
–not vulnerable to weather (damp)
–look in keeping with renfair setting
–unique/artistic/interesting (not common looking)
–ideally protect some from dust/tarnish since larger pieces are more intricate…less cleaning

When I had my shop’s back wall behind the counters in my building ripped out and redone a couple of years ago, along adding a few new cute/quirky windows…I had an idea. What if I hung shallow display cabinets on the wall behind the counter? I normally don’t use cases since I think the jewelry sells much better if people can touch it and I like the friendlier atmosphere it gives the shop. But these would be larger pieces or more fragile that don’t need to be handled as much anyway.

…and ooh! What if, in keeping with the cute little house my shop looks like…what IF instead of just a few plain display cases, I made them interesting shapes and sizes AND made them look reminiscent of picture frames on the wall in a house, but with jewelry hung in them instead of pictures?

Hmmm…okay, so design considerations:
–easy way to add/remove/rearrange jewelry and flexible for variety of shapes/sizes
–some sort of door that won’t be obnoxious that will keep out the dust (more intricate, bigger, more expensive but also may have longer before they find their home…a door would help with cleaning dust and tarnish)
–shallow so that it’s not in our way as we walk by (especially since its in the busiest area)
–wall mounting and secure, but removable for off season
–buildable by me (can customize, make more down the road, and less expensive than commissioning them)

Some solutions:
–the easy to add/remove/rearrange…simple. Will fit interior with board covered in Velcro loop fabric yardage. Mount jewelry on my silver cardstock. Can move around at will, take out to show a customer. Cards have room for more detail (these special pieces sometimes have more info). When sold, easy to rearrange so no big holes. Various sizes can go anywhere, so flexible.

–the look…hmm, half-formed idea of modifying picture frames. Did quick look at store. Nothing commercial case-wise that really works or isn’t cheaply built AND overpriced. Want these to be durable. I can buy frames and modify. A little costly, but if on sale…hmmm…or start haunting thrift stores, get a variety for a song, then paint them similar. Interesting if each a bit different, then painting to tie together. I’m thinking base coat of dark green or black then brushed textures with bronze or copper metallic. Will mull.

–front…glass or plexiglass? Still mulling. Glass, easier to get super clean but is fragile. Plexiglas is sturdier unless a direct blow, but scratches easily. As much dust as we have, the cleaning it would take…I think it would frost up quickly from tiny scratches and be just as “fragile” when moving because of avoiding accidentally gouging it. I think I’m leaning toward glass and replace with plexiglas if it breaks. Will research tempered glass or display case type glass costs. Would be worth price if stronger if not toooo dear.

–the construction…have a half-idea of a hinged side that opens.
Hm, which way? Will mull.
Have glass over frame? Hinge how? Hardware?
How deep then should frames/cases be by the time add depth of fabric board, Velcro, jewelry, stones? Not too shallow, but too deep in way. And find frames that deep? More limiting. Hm. Store-bought shadow boxes start getting costly and tend to be plain. Not quite right.
And look of adding glass on top of or just inside frame? And mechanics. I’m handy and can figure out a lot, but feeling fiddly here. Hm.
And closure…latch or what?
Opening…knob (could catch our clothing going by, latch…how/where to attach)
And how to mount on wall (plus wall is concrete board) so steady while there but removable for storage off season

Hmmmm…the overall idea I’m loving BUT the construction isn’t quite gelling. Onto the backburner…

Squeee!! (and DUH! *headsmack*)

The answer:
Make shadow-box BEHIND the frame, put the frame (the ENTIRE frame/glass is door) with normal glass as usual on top, hinge hidden behind frame connecting to box, magnetic closure. The interior Velcro board as planned.

Here’s the video I ran across today that made everything gel:

http://www.engineeryourspace.com/episodes/how-to-make-a-hanging-jewelry-box-organizer/

Neat idea. Of course the interior of hers isn’t what I need (though cool) but the rest of the construction, I can totally do.

AND bonus, I see a new tool in my future! (happy dance!) …corner clamp ๐Ÿ™‚